A Pocket Surf kit is furnished complete in a fitted case, and includes a Pocket Surf unit with a General Purpose Probe and a 3.2 μm/125 μinch (nominal) Reference Specimen, 9 Volt battery, Riser Plate and screwdriver.

Pocket-sized economically priced, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces; can be used confidently in production, on the shop floor and in the laboratory

Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface finish gaging

Can be used to measure any one of four, switch-selectable, parameters: Ra, Rmax/Ry, Rz

Selectable traverse length 1, 3 or 5 cut-offs of 0.8 mm/.030“

Operates in any position – horizontal, vertical, and upside down

Four switchable probe positions – axial (folded) or at 90°, 180° or 270°

Even difficult-to-reach surfaces such as inside and outside diameters are accessible

Integrated data output for SPC-processing units that is compatible with the most common data processing systems

Easy‑to‑read LCD readout presents the measured roughness value, in microinches or micrometers, within half a second after the surface is traversed.

Out‑of‑range (high or low) and “battery low“ signals are also displayed

Out‑of‑range (high or low) and “battery low“ signals are also displayed