Reference form measuring machine for the inspection and production
environment with tactile and optical sensor
- Uses the advantages of the most modern optical measuring technology
- Non-contact measurement on sensitive pieces
- High measuring accuracy
- Low production costs
- Usable directly in the production environment
- Maximun amount of automation
Features
The high-precision measuring machine MarForm MFU 100 WP is based on the proven MFU
100 and has been expanded with an ultraflexible optical measuring system.
Now one tactile and one optical sensor are at your disposal for high-precision
measuring tasks in the inspection laboratory and in the production environment.
All advantages of traditional tactile and modern optical metrology are united
in this measuring machine. A summary of the advantages of optical metrology are
given below:
- No influence of measuring force: no bending or deformation of
measuring objects
- Non-contact measurement: no scratching or damage of sensitive surfaces
- Direct measurement: no influence of ball tip geometry, therefore more
exact recording of contours, e.g. edges, convex shapes
- Very smal probe arm diameter: measuring of very small objects and shapes,
e.g. small bores
- High rotating speed of the C-axis: less measuring time, more data, laminary
measuring
- High vertical and lateral resolution: more precise measuring of diameter
and distance
- 2 optical outputs: more flexible contacting, less turning of probe arm,
improved cone measuring
- Maximum measuring certainty
- Process accuracy
- Software package MarWin
- Future proof
Just like the MFU
100, an active air-conditioned cabin is optionally available for the MFU 100
WP for use in production environment. Shorter distances and faster intervention
into the production process control reduce your costs and optimize the quality
of your products.
A high degree of automation is achieved through the motorized centering and
tilting table, which is a core component of Formtesters, and the use of the
motorized T7W probe.
Due to the separation of machine control and profile evaluation, the MarForm
MFU 100 WP is easily expandable and ready for the future. The addition of other
languages or special evaluations is possible, as well as the implementation of
new standards.
Application
Evaluation of of roundness, radial run-out, axial run-out, concentricity,
coaxility, total run-out, total axial run-out, cylindricity, straightness,
parallelism, perpendicularity, angularity, flatness, conicity, line form,
position (DIN ISO 1101), cone form, diameter.
- Compact measuring volume, loading capacity up to 200 N
- Inspection of "true parallelism" when the horizontal X-axis passes the
workpiece center, results free from other measuring influences
- Optimal for a higher tolerance latitude in the production environment
Measuring Station Components
FORM MEASURING MACHINE MarForm MFU 100 WP
- High-precision Formtester MFU 100 WP with optical sensor
- Evaluation computer Marwin
- Integrated modem
- PC hardware in compliance with the Mahr standard available at the time of
delivery
- Windows-based operating system (Windows XP professional)
- Software package 'Mahr Form - and Location Evaluation'
- Work table with integrated control unit
- T7W probe: motorized bi-directional length measuring probe, incl. standard
probe arm with sperical stylus, dia. 3 mm
- Optical measuring probe with outputs (45° and 90°)
