MarForm Form Testers |
||
| Only Mahr Federal delivers a gage that meets your most frequent needs in form measurement with such advanced, powerful features, providing the best value on the market. You'll produce more accurate work. Faster. With less scrap. Less rework. | ||
 |
MarForm. Desktop Formtester | |
 |
MarForm. Reference Formtester | |
 |
PRIMAR/Universal Formtester | |
| Software | ||
| MarForm. Software |
 |
The FORM-PC software is available in the languages German, English, French, Italian, Spanish, Portuguese, Swedish or Czech. |
| Primar. Software |
 |
Create measuring programs with little effort, measure new parts quickly and without programming - the solution is to use Primar family programs. |
| Accessories | ||
| MarForm. Accessories |
 |
Roundness Standard, Optical Flat, Universal Cylindrical Square, and Cylindrical squares for checking and aligning spindle axis parallel to the column. |
| Fixtures | ||
| MarForm. Workholding Fixtures |
 |
Rim chuck with 6 jaws, Rim chuck with 8 jaws, 3 jaw chuck, Quick-action clamping device |
| Probes | ||
| MarForm. T2W probe |
 |
T2W inductive probe. Probe arm swivels 180° with a variety of clamping possibilities to allow access to difficult-to-reach surfaces. Easily exchangeable probe arms accept wide range of styli for unequalled measuring versatility. |
| MarForm. T6W probe |
 |
For extreme high-precision and universal applications. Easily exchangeable probe arms can swivel through 110° overload protected in all directions. |
|
|
|
The probe T7W is provided with a motor-driven axis of rotation. The T7W probe features a motor-driven probe arm which can be positioned in steps of 1°. The T7W probe as a zero position probe enables automatic switch over between vertical measurements on the inside and outside and horizontal measurements on the top and bottom of an endface. This is the reason why even the most complex measuring programs can be run without operator intervention. In addition, special probe arms with several styli are available which make it possible to use several stylus geometries in one and the same program run. |
