Starrett Thickness Gage-Feeler Stock Holder;Clamp On Both Ends

Description

The Starrett 806D Thickness Gage or Feeler Stock Holder has a clamp at both ends and provides a handy, convenient means of rigidly holding single leaves or strips of thickness gage stock of any thickness from .001 to .025" (0.03 to 0.5mm). Stock up to 6" (150mm) long is easily inserted in the holder and firmly gripped in the desired position by a cam lock. This permits all of the stock to be used, because as it wears from use, the defective end can be snipped off and new stock pulled out until entirely used up. Available in two types, either to clamp stock at one end or both ends. The holder has a dull nickel finish and is approximately 3-32" thick x 9-16" wide x 5-1-4" long (2.4 x 14 x 130mm). The clamps on this holder have a contrasting finish to eliminate the possible confusion on which end holds the thicker or thinner stock.