Starrett Thickness Gage-Feeler Stock Holder;Clamp On One End

Description

The Starrett 806 Thickness Gage or Feeler Stock Holder has a clamp at one end and provides a handy, convenient means of rigidly holding single leaves or strips of thickness gage stock of any thickness from .001 to .025" (0.03 to 0.5mm). Stock up to 6" (150mm) long is easily inserted in the holder and firmly gripped in the desired position by a cam lock. This permits all of the stock to be used, because as it wears from use, the defective end can be snipped off and new stock pulled out until entirely used up. Available in two types, either to clamp stock at one end or both ends. The holder has a dull nickel finish and is approximately 3-32" thick x 9-16" wide x 5-1-4" long (2.4 x 14 x 130mm).