Calibration Services

MSI Viking offers extensive ISO 17025 Accredited and ISO 9001 Certified calibration capabilities and flexible service choices. Whatever your choice, our goal is to do all in our power to accommodate all your calibration needs.

We offer fast turnaround on every calibration order…usually 7 business days or less. 3-Day and 24-Hour rush services are also available. We’re fast, but we never compromise the quality of our work. MSI Viking provides a certificate of calibration for every instrument, plus pass/fail criteria and analysis; and then we store all your calibration attributes and tolerances in our database for future calibrations and provide you with your own account access.

Access Your Calibration Data

Credentials


A2LA Accredited to ISO/IEC 17025

MSI Viking is proud to be A2LA Accredited to ISO/IEC-17025 standards on an extensive scope of Dimensional, Electronics, Mechanical, Thermodynamics, Magnetic, Chemical, Time and Frequency parameters

AGS ISO 9001:2015 Certification

MSI Viking is also certified by American Global Standard to ISO 9001 quality standards in Dimensional, Electronics, Pressure, Force, Load, Mass, Torque, Temperature, Humidity, and more precision instruments and systems.

Lab & On-Site Calibration Services


MSI Viking has decades of experience in a wide range of gage and instrument calibration services. Our ISO 17025 Accreditation extends to On-Site Calibration and Inspection Services with our complete team of field service technicians. Once you experience our customer service, turnaround, pricing, and expertise you will see why MSI Viking is Your Total Metrology Solution!

MSI Viking offers extensive On-Site Services right in your plant. We have a full team of technicians to provide A2LA Accredited Calibration of Capital Equipment and a broad scope of Dimensional and Electronics Instruments. Field services also include Manufacturer Certified Repair of hundreds of Major Brands, Routine Preventative Maintenance, New Part Installation, Set-Up and Moving Equipment, Support and Training for Application and Maintenance.

Take a look at our extensive ISO/IEC-17025 Scope of Accredited Services for specific range and uncertainty capabilities. Check with us for services you don’t find listed. Chances are very good we can handle it for you.

Calibration Form

Or Call Direct:

Duncan Lab 864.661.7018
Charleston Lab 843.566.9106
Durham Lab 919.797.9600
Ohio Lab 513.829.0900
Michigan Lab 734.451.8740

Electronic Instruments

AC/DC High Voltage
Ammeters
Amplifiers
Analog Meters
Capacitance
Clamp Meters (up to 1000 Amps)
Counters
Data Loggers
Decade Resistors/Boxes
Frequency Counters to 18GHz
Function Generators

Insultation Testers
Meggers
Multifunction Calibrators
Multimeters
Oscillators
Oscilloscopes
Panel Meters
Power Supplies
Pulse Generators
Radar Guns X-K Bands

Resistance
RTDs
RPM Indicators/Tachometers
Stroboscopes
Temperature/Thermocouple Simulation
Timers/Stop Watches
Volt/Ohm Meters
Waveform Generators
Welding Machines
X-Y Recorders

Expert Technicians

Dimensional Gages & Instruments

Angle Plates/Blocks
Bench Centers
Bolt Protrusion Gages
Bore Gages
Calipers/Caliper Checkers
Chamfer/Hole Check
CMMs
Co-Ax Indicators
Contour Machines
Concentricity Gages
Crimping Tools
Cylindrical Square
Dynamometers

Electronic Amplifiers
Electronic Levels
Feeler/Thickness Gages
Gage Blocks
Glass Scales
GO/NO-GO Gages
Hand Tools
Hardness Testers
Height Gages
Height Set Masters
ID/OD Comparator
Indicators/LVDTs/Calibrators
Kalmasters

Laser Micrometers
Length Standards
Levels
Master Balls/Discs
Micrometers
Optical Comparators
Optical Flats
Pin Gages
Pi-Tapes
Protractors
Radius Gages
Ring/Plug Gages
Roundness Machines

Roughness Patches
Sine Bar
Step Gages
Surface Testers
Surface Plates
Snap Gages
Steel Rules- up to 72″
Tape Measures
Thread Plug/Ring Gages
Thread Wires
Universal Measuring Machines
Video Machines

Mechanical & More

Mechanical & Rotational

Barometers*
Dead weight testers
Force Transducers/Gages
Hardness Testers
Load Cells
Magnehelic Gages
Mass/Weights
Pressure Gages/Transducers/Calibrators
Scales and Balances
Torque Transducers/Wrenches/Guns/Analyzers
Tachometers/RPM Indicators
Vacuum Gages

Thermodynamics

Humidity/Hygrometers
Infrared Thermometers
Ovens/Freezers
RTDs
Temperature Controllers/Indicators
Thermocouples
Thermometers

Advanced Equipment

Master Technician

BEYOND THE SCOPES



Non-Accredited Calibrations

MSI Viking also offers an extensive list of calibration procedures on a non-accredited basis. A non-accredited calibration simply means that our measuring procedures for that instrument have not been evaluated by an official accreditation organization. While these measurements are not listed on our scope, all calibrations performed by MSI Viking remain traceable to the National Institute of Standards and Technology (NIST) or other recognized international standards.

Like our accredited calibrations, our non-accredited calibrations are accompanied by a calibration certificate (absent an accrediting body logo) which provides a description of the measuring procedure, applied measurement standards, traceability, and as found/as left readings.

Sub Contracting Calibrations

No single company can provide calibration services for every instrument out there. It is our goal at MSI Viking, however, to be Your Total Metrology Solution. That means if we can’t calibrate an instrument within your requirements, we will make every effort to still handle the job by subcontracting it for you, or at least referring you to someone who can. This means you save valuable time and the frustration of dealing with multiple vendors.